Электронная записная книжка casio sf 4600rs инструкция

Картинка с сайта: manualmachine.com

SF-4600RS(ZX-860AT)
SF-4900RS(ZX-860ET)

JUN. 1995

(with price)

SF-4600RS

SF-4900RS

R

Картинка с сайта: manualmachine.com

CONTENTS

1. SCHEMATIC DIAGRAM………………………………………………………………………………………. 1

1-1. MAIN PCB…………………………………………………………………………………………………… 1

1-2. KEY MATRIX ………………………………………………………………………………………………. 2

2. SPECIFICATIONS ………………………………………………………………………………………………. 3

3. TO REPLACE THE BATTERIES…………………………………………………………………………… 5

4. DATA TRANSFER………………………………………………………………………………………………. 6

5. OPERATION REFERENCE………………………………………………………………………………… 10

5-1. RESET OPERATION ………………………………………………………………………………….. 10

5-2. TO ADJUST THE DISPLAY CONTRAST ……………………………………………………… 11

5-3. TO CHECK THE MEMORY STATUS……………………………………………………………. 11

5-4. THE SOUND MENU……………………………………………………………………………………. 11

6. LSI, IC (Pin function) ………………………………………………………………………………………… 12

6-1. CPU………………………………………………………………………………………………………….. 12

6-2. RAM:CXK58257AM (LSI2,LSI3) ………………………………………………………………….. 13

6-3. OPERATION PROGRAM ROM PIN DESCRIPTIONS (

6-4. RAM PIN DESCRIPTIONS (CXK581000AM)…………………………………………………. 14

6-5. VOLTAGE REGULATOR:S-81253SGUP (REG1) ………………………………………….. 14

6-6. VOLTAGE DETECTOR:RH5VL46CA (DET1)………………………………………………… 14

µPD23C1001)………………. 13

7. TROUBLESHOOTING……………………………………………………………………………………….. 15

8. HARD CHECK ………………………………………………………………………………………………….. 18

9. ASSEMBLY VIEW …………………………………………………………………………………………….. 23

10. PARTS LIST …………………………………………………………………………………………………….. 25

Картинка с сайта: manualmachine.com

1. SCHEMATIC DIAGRAMS

1-1. MAIN PCB

— 1 —

Картинка с сайта: manualmachine.com

1-2. KEY MATRIX

— 2 —

Картинка с сайта: manualmachine.com

2. SPECIFICATIONS

Data storage:

Storage and recall of telephone, memo, schedule, reminder data; calendar display; secret area; editing;
memory status display.

Clock:

World time; reminder alarm; schedule alarm; daily alarm; accuracy under normal temperatures: ±3
seconds average.

Calculation:

10-digit arithmetic calculations; arithmetic constants (+, –, ×, ÷); independent memory; percentages;
square roots; 20-digit approximations; date calculations; other mixed calculations.

General:
Display element: 16-column × 4-line LCD
Memory capacity: SF-4600RS: 64 KB (61282 bytes)

SF-4900RS: 128 KB (126818 bytes)

Main component: LSI
Power supply: 2 lithium batteries (CR2032)
Power consumption: 0.05W
Battery life:

Approximately 350 hours continuous operation in Telephone Directory
Approximately 300 hours repeating one minute of input and 10 minutes of display in Telephone
Directory
Approximately 12 months for memory backup

Auto power off: Approximately 6 minutes after last key operation
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Dimensions:

Unfolded: 10.6H × 141W × 159.5Dmm (3/8«H × 5 1/2«W × 6 1/4«D)
Folded: 12.4H × 141W × 82Dmm (1/2«H × 5 1/2«W × 3 1/4«D)

Weight: 105 g (3.7 oz)

Current consumption:

Power switch TYP. [µA] MAX [µA]

OFF 11 —

ON 560 600

Storage Capacity:

The 64K(SF-4600RS)/128K(SF-4900RS) bytes memory capacity includes a 61282(SF-4600RS)/
126818(SF-4900RS) bytes user area. The following shows examples of what this means for the
storage of data in each mode.

Telephone Directory:

Approximately 2918(SF-4600RS)/6038(SF-4900RS), under the following conditions:

8-character name
10-character telephone number

— 3 —

Картинка с сайта: manualmachine.com

Approximately 1459(SF-4600RS)/3019(SF-4900RS), under the following conditions:

Memo:

Approximately 2785(SF-4600RS)/5764(SF-4900RS), 20-character memos.

Schedule Keeper:

Approximately 1857(SF-4600RS)/3842(SF-4900RS), under the following conditions:

20 characters per item
Starting time specified, alarm time set

Approximately 2188(SF-4600RS)/4529(SF-4900RS), under the following conditions:

20 characters per item
Starting time specified, no alarm time

Reminder:

Approximately 3604(SF-4600RS)/7459(SF-4900RS), under the following conditions:

Approximately 4085(SF-4600RS)/8454(SF-4900RS), under the following conditions:

8-character name
10-character telephone number
20-character address

10 characters per item
Alarm time set

10 characters per item
No alarm time

— 4 —

Картинка с сайта: manualmachine.com

3. TO REPLACE THE BATTERIES

1) Loosen the screw on the back of the unit that holds the

Screw

battery compartment cover in place, and remove the
cover.

2) Loosen the screw that secures one of the two battery
holders in place and remove the battery holder.

RESET

Caution:
Be sure to remove only one battery at a time.
Otherwise, you will lose all data stored in memory.

3) Replace the old battery with a new one, making sure
that the positive (+) side of the new battery is facing up
(so you can see it).

4) Replace the battery holder and secure it by tightening its screw.

• Be sure careful that you do not over tighten the screw.

5) Repeat steps 2) through 4) for the other two batteries.

• Be sure to replace all two batteries. Never mix old batteries with new ones, and be sure to use

CR2032 lithium batteries only.

6) After you replace all two batteries, replace the battery compartment cover and secure it by tightening
its screw.

• Be careful that you do not over tighten the screw.

— 5 —

Картинка с сайта: manualmachine.com

4. DATA TRANSFER

SF-4600RS/4900RS can transfer customers data to other SF-4600RS/4900RS with memory protection
only when replacing the LCD or the outer case.

* Before connecting the cable (SB-60/62), be sure to reset the slave machine to clear all data.

How to transfer the data

1) Turn off the power switch and connect the two units using the cable (SB-60/62) as shown in the
drawing.

SB-60/62 accessory cable

2) Turn on the power switch of each machine.

3) The slave machine must be set the date of Feb. 3rd, 1901 into the memory under the calculator mode.

Operation: 1. Press

2. Select «CAL» mode or press 6.

M+

123

3.

M SUN

1901/ 2/ 3

If you don’t set the date, the «PASSWORD» isn’t transferred to the slave machine.

— 6 —

Картинка с сайта: manualmachine.com

Setting up for Data Communications

The following procedures describe what you should do to set up for data communications between
two SF Units or between an SF Unit and a personal computer. In addition to hardware connections,
it details how to set up the communications parameters and how to set up the SF-Units to receive
data. By following these instructions carefully, you can be ensured of successful communications
every time.

To connect two SF Units

1. Check to make sure that the power of the two SF Units is switched off.

2. Remove the covers from the connectors on the two SF Units.

3. Connect the two SF Units using the optional SB-60/62 cable. You can also connect them using

an SB-60/62 cable.

Important

Be sure to replace the connector covers on the SF Units when you are not performing data
communications.

4) Check the hardware parameters.

1. Select «TEL» mode or press

11

1 under MENU screen.

11

2. Press twice to display the second function menu.

*If the password isn’t

registered in the SF unit,
display shows X instead
of «1».

• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.

3. Press 4 to select DATA COMM.

4

4. Press 3 to select SET UP.

3

•N is blinking.

— 7 —

Tisztelt Szakik!

Fellelt állapotban került hozzám ez az igen «régi» gépösszeállítás, FP1100 alapgép a billentyűzettel, FP-1020 dupla flopyval, 
DE monitor nincs hozzá!
Jelenleg a pucolás fázisánál tartok, flopy egység még hátra van, a gép úgyahogy kész.
Mielőtt folytatván nagyon belemerülnék indokolatlanul, szeretném kipróbálni, mivel mindenképp eladásra menne, lenne jelentősége ármegállapításnál, hogy műxik-e vagy sem. Áram alá helyezve bekapcsol, táp ventilátor forog, bill-en ledek világítanak.
A monitor csatlakoztatás lenne kérdés, Milyen jelekkel dolgozik ez a gép? A csatija olyan mint a c64-nek, de nem tudom a lábkiosztást, kárt okozva meg nem kísérleteznék.
Erről volna szó a billentyűzettel:
https://www.1000bit.it/support/articoli/fp1100/FP1100_3.asp

Üdv D Attila