Как измерить сахар в крови глюкометром accu chek в домашних условиях видео инструкция по применению

Время измерения:

5 секунд

Память:

500 результатов тестов с указанием времени и даты

Средние значения:

7, 14, 30 и 90 дней

Отметки для результатов «до и после» еды:

да

Напоминания об измерениях после еды:

да

Информирование о низком уровне сахара крови:

да, с индивидуальной настройкой

Функция будильника:

да, на 4 момента времени

Вес:

59 г (включая батарею)

Температура для проведения измерений:

+8 °C до +44 °C

Температура хранения:

от -25 °C до +70 °C

Допустимый диапазон значений :

0,6 — 33,3 ммоль /л

Принцип измерения:

электрохимический

Батарея:

1 батарея, CR 2032

Передача данных в ПК:

через ИК-порт

• Just two buttons are used to operate the meter, for intuitive handling.
• Large and easy-to-read display.
• In- or out-of-meter for simple and comfortable testing.
• Safety features include underdosing alerts, re-dose option in 10 seconds, and test strip expiration warnings
• The visual double check lets you see your recent test result.
• Post-meal alert reminds you to test 2 hours after eating.
• Pre-meal and post-meal markers are available.
• 500 test results are stored in memory.
• See averages of all blood test results over 7, 14, 30 and 90 days.
• Fulfills 100 % of the accuracy requirements of DIN EN ISO 15197:2003.¹
• Date and time are preset for faster setup.
• Changing the battery doesn’t mean losing the date and time settings.
• Transfer data from the meter to your PC using a USB cable. You will need an
  Accu-Chek^®  diabetes management solution on the PC to analyze the data.
• 30 % smaller than previous Accu-Chek^®  Active meters with a 10 % bigger display.

Model:

Accu-Chek^® Active (Model GU)

Serial number:

Unique serial number is printed on a label on the device and stored in non-volatile memory

Measuring principle:

Mutant variant of the glucose dehydrogenase quinone protein (Mut. Q-GDH 2, modified variant of EC 1.1.5.2), acinetobacter spec; photometric end-point measurement

Measuring time:

Approximately 5 seconds (blood application with test strip within the meter)
Approximately 8 seconds (blood application with test strip outside the meter)

Temperature:

+8 to +42 °C (+46.4 °F to +107.6 °F)

Humidity:

Up to 93 % relative humidity

Storage conditions without battery:

-25 to + 70 °C (-13 °F to +158 °F)

Memory capacity:

Up to 500 values with date and time

Test averages:

7, 14, 30, 90 days

Data transfer:

Via USB interface (with Micro-USB cable)

Automatic coding:

Via code chip (batch specific code chip)

Warning:

Strip expiry warning (data is stored in the code chip)

Dimensions:

97.8 x 46.8 x 19.1 mm

Weight:

46 g without battery, 50 g with battery

Display:

96 segments LCD display with symbols

Beep tone:

Yes (Factory setting ON)

Battery:

1 battery, type CR 2032

Battery life:

Approximately 1000 measurements or one year (whichever comes first)

Auto power off:

30 or 90 seconds according to operating status

Underdosing detection:

Yes

Altitude independence:

0–4,000m (0-13,123 feet)

Measuring range:

10 mg/dL – 600 mg/dL, 0.6 mmol/L – 33.3 mmol/L

Sample types:

Capillary blood

If the test strip is removed from the meter to apply blood:

Venous blood anticoagulated with lithium heparin or ammonium heparin or EDTA, arterial blood and blood from neonates

Sample dosing:

Blood application on to the middle of the test pad. The test strip (and its components) has the function to spread the blood above the test area in a quick and hygienic way

How to use Accu-Chek® Active blood glucose meter

Testing your blood glucose is an essential part of managing diabetes. The Accu-Chek^®  Active blood glucose meter can help to  make it convenient by giving you fast, hassle-free, and accurate results in 4 simple steps.

• Insert the glucose test strip
• Prick your finger with the lancet to draw out a blood drop.
• Carefully touch the blood drop onto the green field of the test strip.
• Read the blood glucose result.

• Effortless Bluetooth synchronization with mySugr diabetes management app
• The intuitive target range indicator gives you visual reassurance. It can be individualized to suit your personal therapy goals
• Only what you need: Your test result and your averages (7/30/90 days) are visible on the meter
• Sleek, modern design with large, easy-to-read BG numbers and a bright, backlit display
• No set up required – just insert a strip, apply a small blood sample, and read your blood glucose result on the large display
• Easy-edge test strip: Apply a small drop of blood anywhere along the wide, yellow edge
• Proven accuracy guaranteed by the makers of the Accu-Chek brand, fulfilling the requirements of the ISO 15197:2013, EN ISO 15197:2015
• All data can be uploaded to the mySugr by using Bluetooth Low Energy wireless technology and to Accu-Chek Connect Online portal by using USB
• Test strips come in a 10, 25, 50 vial so you can choose whatever fits your budget or therapy
• Enjoy virtually pain-free testing with the Accu-Chek Softclix lancing device

Model:

Accu‑Chek Instant wireless blood glucose meter​

Meter storage conditions:

Temperature: -25 – 70° C

Memory capacity:

The meter automatically stores at least 720 blood glucose results in memory, but only the last blood glucose result and your 7, 30, and 90 day averages can be viewed on the meter. To view stored blood glucose results, transfer them to a compatible software application.  The meter automatically stores at least 30 control results in memory, but only the current control result can be viewed on the meter. To view stored control results, transfer them to a compatible software application.

Sample claims:

Capillary: Yes

Venous: Yes

Arterial: Yes

Neonate: Yes

Non-fingerstick sample Claim:

Palm, forearm, upper arm

Measuring principle:

FAD glucose dehydrogenase (GDH)

Measuring conditions:

4 °C to 45 °C (39 °F to 113 °F)

Hematocrit range:

10 to 65 %

Humidity range:

10 to 90 %

Altitude independence:

0 to 3,094 m (10,150 ft)

Automatic off:

90 seconds after performing a test, 15 seconds after test strip is removed, or 5 seconds from the last test result screen.

Weight:

Approx. 40 g (with batteries)

Meter type:

The Accu-Chek Instant  meter is suitable for continuous operation.

Interfaces:

Connectivity using BLE wireless Technology to mySugr App; USB interface with USB cable to transfer data to the Accu‑Chek Connect Online system.

Reference 1. ISO 15197:2013. 2. Accu-Chek Instant package insert. 3. Breitenbeck N, et al., J Diabetes Sci Techno 2017, 11(4):854-855. 4. Kocher S., et al., J Diabetes Sci Technol 2009;3(5):1136-1143.
 

Disclaimer: Accu-Chek Softclix lancing device is for single patient use only. The same device must not be used for multiple patients
 

The Bluetooth® word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.