Швейная машина juki hzl f600 инструкция

F

• FS322L01
• FS332C01
• FS332C12
• FS332E12
• FS332H01
• FS332L21
• FS335E41
• FS335E42
• FS335E45
• FU-02L3
• FU-02S2
• FU-052
• FU06
• FU-07

H

• HZL-12Z2
• HZL-25Z3
• HZL-27Z6
• HZL-29Z2
• HZL-30Z3
• HZL-350Z series
• HZL-353Z
• HZL — 353Z Series4
• HZL-355Z
• HZL — 355Z Series4
• HZL-357Z
• HZL-357ZP
• HZL — 357Z Series4
• HZL-35Z5
• HZL-602
• HZL-600
• HZL-60ce4
• HZL-60 series
• HZL-70HW-B
• HZL-70 series
• HZL-80 series
• HZL DX
• HZL-DX5
• HZL-DX7
• HZL-DX series
• HZL-E40
• HZL-E50
• HZL-E616
• HZL-E703
• HZL-E712
• HZL-E804
• HZL-F
• HZL-F3002
• HZL-F4003
• HZL-F6002
• HZL-F series6
• HZL-G110
• HZL-G1202
• HZL-G210
• HZL-G220
• HZL-G320
• HZL-G series3
• HZL-K656
• HZL-K853
• HZL LB 5100
• HZL-L series
• HZL-NX72
• HZL-T1004

I

• IP-1005
• IP-100C26
• IP-100D
• IP100E/SC510
• IP-1104
• IP-110(A)
• IP-110C8
• IP-110(D)
• IP-110E/SC-5108
• IP-110F2
• IP-110 TYPE F8
• IP-2007
• IP-200/LBH-17907
• IP-200/LK-1900A13
• IP-3109
• IP-310/ACF-172-1790
• IP-4108
• IP-42011
• IT-106
• IT-1005
• IT-100A9
• IT-100E
• IT-110A
• IT-206

J

• J-350QVP
• JA041
• JA045D
• JA 3662
• JSF-9003
• JUKIMO6700S

K

• KE-750
• KE-760
• KGS
• KT-0117

L

• L0122
• LB6
• LBH-1700 Series
• LBH-179014

Instruction Manual

164 pgs38.24 Mb0

User Manual [ru]

125 pgs67.52 Mb0

To adjust the tension for the upper thread, locate the tension dial located on the front of the machine. Turn the dial clockwise to increase the tension and counterclockwise to decrease it. Experiment with different settings until you achieve the desired stitch quality.

First, ensure that you are using the correct type and weight of thread for your project. Check the needle to make sure it is not bent or dull, as this can cause thread issues. Re-thread the machine, ensuring that the thread is properly guided through all the thread guides and the needle eye. Also, confirm that the bobbin is inserted correctly. If the problem persists, clean the machine, especially around the bobbin area, as lint buildup can affect the thread flow.

To change the presser foot, first, raise the presser foot lever to lift the current foot. Locate the lever at the back of the machine, lift it upwards, and gently remove the foot. Choose the appropriate presser foot for your sewing needs and align the pin on the foot with the presser foot holder. Lower the lever to secure the new foot in place.

Begin by re-threading the upper thread, ensuring it passes through all the necessary guides correctly. Check the needle for any damages or looseness, and replace it if necessary. Confirm that the needle is inserted correctly, with the flat side facing the back of the machine. Adjust the tension settings, ensuring they are suitable for the fabric you are working with. If the issue persists, try using a different thread or consult a technician for further assistance.

Regular maintenance is crucial for optimal machine performance. Start by unplugging the machine and removing the needle, presser foot, and bobbin case. Use a soft brush or lint brush to remove lint, dust, and loose threads from the machine’s different compartments. Wipe the exterior with a clean, damp cloth if necessary. Lubricate the machine as specified in the user manual, using only recommended sewing machine oil. Remember to follow the recommended maintenance schedule to keep your machine in excellent condition.

Which size of needle you can best use depends on the thickness of the fabric you use. With a thick fabric you should use a thick needle. The packaging of your needle states for which substances your needle is suitable.

There can be several causes for needle breakage:
— Not using the right needle for the right fabric
— The needle is set too low
— The fabric is not properly guided
— The bobbin case is not inserted correctly

Generally, a sewing needle lasts about 7 to 9 hours.

Yes, the manual of the Juki HZL-F600 is available in English .