Звукосниматель fishman для акустической гитары инструкция

Картинка с сайта: manualmachine.com

htop Guitar Pic

ArArcchtop Guitar Pic

Thank you for your purchase of a FISHMAN product. Please read these instructions
carefully. If you have any questions or problems, contact our PRODUCT INFORMATION
LINE at 978-988-9665.

The FISHMAN ARCHTOP GUITAR PICKUP is a string-sensitive piezoelectric transducer.
It comes implanted in the top of a complete replacement bridge. It senses string vibra­tions via two ceramic elements, located in the top of the bridge, directly above the height
adjustment wheels.

The ARCHTOP GUITAR PICKUP is a «passive» style ceramic pickup that can be used
without an onboard preamp. It can be plugged directly into an instrument level (minimum
1 Meg Ohm) audio input with adequate results (see Plugging In). The high quality ebony
bridge can be mounted without any physical alterations to the instrument and may be
intonated as needed.

INSTALLATION BY A QUALIFIED PROFESSIONAL REPAIRMAN IS

STRONGLY RECOMMENDED. FISHMAN TRANSDUCERS WILL NOT BE

RESPONSIBLE FOR ANY DAMAGES TO YOUR INSTRUMENT.

PARTS L

IST

• Archtop guitar bridge assembly with pickup implant

• 1/4″ jack and attached ground wire

• Mounting clamp

• 1/8″ washer

• 1/2″ screw

kup

kup

WARNING

LIMITS AND DIMENSIONS

Maximum E to E string spacing = 2-1/2″
Up to 1/8″ of wood may be removed from the top of the bridge without sacrificing the
pickup’s performance.
Distance between adjustable bridge posts = 2.914″ inches, center to center.
Bridge radius: 12″.

2

2

Limited WW

Limited

The FISHMAN ARCHTOP GUITAR PICKUP is warranted to function for a period of
One (1) Year from the date of purchase. If the unit fails to function properly within
the warranty period, free repair and the option of replacement or refund in the event
that FISHMAN is unable to make repair are FISHMAN’s only obligations. This
warranty does not cover any consequential damages or damage to the unit due to
misuse, accident, or neglect. FISHMAN retains the right to make such
determination on the basis of factory inspection. Products returned to FISHMAN for
repair or replacement must be shipped in accordance with the Return Policy, as
follows. This warranty remains valid only if repairs are performed by FISHMAN. This
warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.

RETURN POLICY

To return products to FISHMAN TRANSDUCERS, you must follow these steps…

1. Call FISHMAN TRANSDUCERS at 978-988-9199 for a Return Authorization
Number (“RAN”).

2. Enclose a copy of the original Bill of Sale as evidence of the date of purchase,
with the product in its original packaging and a protective carton or mailer.

3. FISHMAN TRANSDUCERS’ technicians will determine whether the item is
covered by warranty or if it instead has been damaged by improper customer
installation or other causes not related to defects in material or workmanship.

4. Warranty repairs or replacements will be sent automatically free of charge.

5. If FISHMAN TRANSDUCERS determines the item is not covered by warranty,

we will notify you of the repair or replacement cost and wait for your authorization
to proceed.

340-D Fordham Road Wilmington MA 01887 USA

FISHMAN TRANSDUCERS

Phone 978-988-9199 • Fax 978-988-0770

www.fishman.com

arranty

arranty

®

®

009-020-002 • 9-00

Installation Guide

Installation Guide

Archtop Guitar Pickup

Картинка с сайта: manualmachine.com

htop Guitar Pic

ArArcchtop Guitar Pic

INSTALLATION

For optimum pickup performance:

kup

kup

BEVEL

TOP

FIG.1: ADJUSTER WHEEL

FIG. 1

1. Fit the base of the bridge precisely to the top of the instrument.

2. Note that the tops of the height adjustment wheels are specially beveled

(See Fig.1). Make sure that the beveled sides face up toward the top of
the bridge.

3. The adjustment wheels must be at least one turn (thread) up from the

top of the base.

4. DO NOT attempt to combine the Fishman Archtop Pickup and your gui-

tar’s magnetic pickups passively with a single mono jack. Doing so will
kill the performance of the piezo pickup. Instead, see “WIRING
OPTIONS” #3.

FIG. 2

3

3

htop Guitar Pic

ArArcchtop Guitar Pic

kup

kup

WIRING OPTIONS

We suggest routing the pickup wire in one of the following ways:

1. SUPPLIED EXTERNAL JACK
a. Remove the shielding cap from the jack and thread the pickup wire through it.
b. Solder the signal wire from the pickup to the tip connection on the

jack.
c. Solder the shield from the pickup to the ground tab on the jack.
Replace and tighten shielding cap.
d. Install the jack as shown in figure 2. If the instrument has a metal tail­piece, attach the supplied ground wire to it. If the instrument has a
wooden tailpiece, attach the ground wire to the ball ends of the strings.

2. ENDPIN JACK

An E-Z mount endpin jack manufactured exclusively for Fishman by
Switchcraft is available. A 15/32″ hole must be drilled through the end­block and butt plate. If the instrument has a wooden tailpiece, attach the
ground wire to the ball ends of the strings.

3. STEREO WIRING IN CONJUNCTION WITH MAGNETIC PICKUPS.

The Fishman Archtop pickup and magnetic pickup(s) can be routed
through a stereo jack, fed through a stereo cable and mixed together via
the Fishman Blender system.

PLUGGING IN

Due to the nature of passive pickups, the type of cable you use and the input you plug
into will affect the quality of your sound.

Cable lengths over 10 feet (before preamp) will cause audible high frequency loss. Use
a high quality, low capacitance shielded cable. This will insure minimal tone coloration
and hum. Using fully shielded metal plugs will also help eliminate hum.

INSTRUMENT CABLE

4

4

htop Guitar Pic

ArArcchtop Guitar Pic

Because of the lack of standardization for high impedance audio inputs, special atten­tion should be paid to what you are plugging into:
The ARCHTOP PICKUP will sound best when plugged directly into an input with a 10

Ω

impedance. At 10 MΩ, the full frequency response of the instrument is reproduced.

M
The ARCHTOP PICKUP can also be plugged into inputs as low as 1 M
results. At 1 M

We strongly recommend using a 10 MΩ, impedance matching, buffered preamp in con­junction with the pickup. A matching preamp will:

1. Realize the full frequency response potential of the pickup.

2. Permit long cable runs (after the preamp) without signal deterioration.

3. Allow precise volume and tone shaping with dedicated EQ.

4. Insure compatibility with virtually any instrument level audio input available.

Fishman Transducers manufactures a complete line of compatible preamps, all with 10

Ω

M

Most musical instrument amplifiers (at least 1 MΩinput impedance) will yield useable
results. Acoustic instrument amplifiers (such as the Fishman Acoustic Performer Pro) have a 10

Ω

M

You can plug the ARCHTOP PICKUP into an «active» direct box ( 1 — 10 MΩinput ) with
very good results. Using a passive direct box will sound weak and thin.

Professional PA and recording consoles have a much lower input impedance than what
is acceptable for the ARCHTOP PICKUP; you will need an impedance matching preamp.
Plugging a passive piezo pickup into a mixer without an impedance matching preamp will
sound harsh and thin.

Ω

inputs:

POWERJACK — Miniature Endpin Preamp
GII & BII — Outboard Acoustic Instrument Preamp
AGP-2 — Onboard Instrument Preamp
PRO-EQ II — 4 Band Acoustic Instrument Preamp
PRO-EQ PLATINUM — Outboard Acoustic Instrument Preamp / EQ / D.I.
DUAL PARAMETRIC D.I. — Fully Parametric Two Band Preamp / D.I.
ACOUSTIC / BASS BLENDER — 2 Channel Pickup / Mic Preamp
POCKET BLENDER — 2 Channel Pickup/Mic Preamp

Piezo input; ideally matching the pickup.

KINDS OF AUDIO INPUTS

, the bass frequencies will be slightly rolled off.

MUSICAL INSTRUMENT AMPLIFIERS

P A / RECORDING CONSOLES

kup

kup

PREAMPS

DIRECT BOXES

5

5

Ω

with adequate

Активный предусилитель для установки в акустическую гитару Fishman Blend 301 (микрофон+пьеза) со встроенным тюнером.
Гибкий пьезозвукосниматель Sonicore подходит для установки как на классику, так и на вестерны.
В модели 301 в корпус предусилителя встроен микрофон, доля которого в миксе регулируется отдельной крутилкой.
Трехполосный эквалайзер, защита от «наводок» (регулятор notch).
В комплекте весь необходимый крепеж.
Размер необходимого для установки отверстия — 67×51 мм, диаметр дырки для endpin-jack на торце гитары — 12 мм.

Бортовые предусилители Presys спроектированы и созданы для обеспечения максимального контроля, производительности и качества в небольшом ненавязчивом формате.
Система Presys оснащена регуляторами громкости, низких, средних и высоких частот, переключателем фазы и встроенным тюнером со светодиодным дисплеем, звукоснимателем Fishman Sonicore, индикатором низкого уровня заряда батареи, ручками регуляторов с низким профилем. Уникальная поворотная конструкция обеспечивает легкий доступ к батарейному отсеку.

Компактный размер подойдет для большинства гитар.
Регулятор громкости.
Регуляторы высоких, средних и низких частот.
Встроенный тюнер с дисплеем.
Индикатор низкого уровня заряда батареи.
Переключатель фазы.
Звукосниматель Fishman Sonicore.
длина провода пьезоэлемента 31,5см
Уникальный дизайн для мгновенного доступа к батарее на 9 Вольт.
Ручки регуляторов с низким профилем.
Встроенный контроль обратной связи (Notch).
Контроль Brilliance для дополнительного формирования звучания.
Встроенный микрофон с регулятором уровня смешения Blend.
Питание: батарея 9 В.
Время работы от батареи: 88 часов.

Для того, чтобы задать вопрос, необходимо авторизоваться