-
Consumer services
>
-
User manual, instruction for use
>
-
Linen Care
>
-
Garment steamer
>
-
IXEO POWER — QT2020
Smart and powerful: The garment-care revolution
The Tefal IXEO Power All-in-One iron steamer station combines a high-pressure technology for ultimate steam power, with a built-in three-position Smart Board, for exceptional results that help you look your best in no time. With an ergonomic upright-to-horizontal design combined with an ultra-light iron head, the garment-care experience gets upgraded to a new era. Ready in about 70 seconds, IXEO Power makes ironing your shirt twice as fast and is the perfect solution for smooth and wrinkle-free looks every day.
Reference : QT2020E0
Frequent questions
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
— water from clothes dryers
— scented or softened water
— water from refrigerators, batteries, air conditioners
— rain water
— boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
To use the Smart Board, place your hands on each side of the board, lift it vertically and incline it according to your preference:
The IXEO tank is removable, for maximum comfort of use.
With a one-litre volume, it allows you to do short or long sessions.
With its clean design, IXEO can easily blend into your home.
Equipped with small wheels underneath its base, you can easily move it effortlessly.
However, if you wish to store the product, it can be lowered to a height of 105cm.
More compact, it can then easily be stored in a dressing room or closet.
To help you assemble your IXEO, simply follow this video:
Successively press the «Steam» button until you reach the desired mode.
• Normal mode: the green light is off.
• Max mode: the green light flashes.
• Min mode: the green light is on steady.
Boost steam:
By pressing the steam trigger 3 times briefly and successively, few sets of ultra-boost steam can be released for garments that require extra attention to remove the creases.
Discover how to use the IXEO Power thanks to the following video tutorials.
How to iron a shirt?
How to iron pants?
How to sanitize curtains?
How to iron a dress?
How to steam a jacket?
This operation should only be performed after the appliance has been unplugged for more than two hours.
It could be unsafe to remove the calc-collector cap when the appliance is not cooled down properly. With the high pressure boiler, it helps to produce strong and consistent steam, and it is critical to only remove the calc-collector cap after the appliance is switched off for more than two hours. This allows the pressure of the boiler to decrease to a safe level for releasing the limescale / calcification.
To remove limescale from your appliance, please follow the instructions below:
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on «I».
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in «Stand-by» mode ==> Press the «On-Off» button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on «I».
The product is in «Stand-by» mode ==> Press the «On-Off» button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Make sure that the 2 masts are correctly oriented first:
After rinsing the boiler, you need to press and hold the restart button for about 3 seconds to stop the light flashing.
You have pressed the steam trigger 3 times briefly and successively which triggered the «Boost» mode. The steam is then automatically activated for a few seconds.
• After approximately one minute, and regularly while it is being used, your IXEO Power’s electric pump injects water into the boiler. It makes a noise and this is quite normal. A slight drop in steam may also be noticed at the same time.
• Your appliance has limescale, consult the «Descaling» section in the instructions.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
-
Warranty
View the product warranty conditions
-
Contact
Our advisors are at your service.
-
Tefal UK : innovative leader in kitchen and home appliances
>
-
Consumer services
>
-
Instructions for use
>
-
Linen Care
>
-
Garment steamer
>
User manual and frequently asked questions Tefal IXEO Power QT2020 All-in-One Iron and Clothes Steamer Solution / Black & Copper
The power of a steam generator with the convenience of a garment steamer
- Iron in comfort flat, vertically or on an incline on the built-in Smart Board
- Achieve quality results faster using 5.8 bars and 200g/min steam boost
- Simplify ironing with an ultra-light steam head and three steam settings
- Refresh and sanitise upholstery around the home thanks to the portable tank
Reference : QT2020G0
Frequent questions
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
— water from clothes dryers
— scented or softened water
— water from refrigerators, batteries, air conditioners
— rain water
— boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
To use the Smart Board, place your hands on each side of the board, lift it vertically and incline it according to your preference:
The IXEO tank is removable, for maximum comfort of use.
With a one-litre volume, it allows you to do short or long sessions.
With its clean design, IXEO can easily blend into your home.
Equipped with small wheels underneath its base, you can easily move it effortlessly.
However, if you wish to store the product, it can be lowered to a height of 105cm.
More compact, it can then easily be stored in a dressing room or closet.
To help you assemble your IXEO, simply follow this video:
Successively press the «Steam» button until you reach the desired mode.
• Normal mode: the green light is off.
• Max mode: the green light flashes.
• Min mode: the green light is on steady.
Boost steam:
By pressing the steam trigger 3 times briefly and successively, few sets of ultra-boost steam can be released for garments that require extra attention to remove the creases.
Discover how to use the IXEO Power thanks to the following video tutorials.
How to iron a shirt?
How to iron pants?
How to sanitize curtains?
How to iron a dress?
How to steam a jacket?
This operation should only be performed after the appliance has been unplugged for more than two hours.
It could be unsafe to remove the calc-collector cap when the appliance is not cooled down properly. With the high pressure boiler, it helps to produce strong and consistent steam, and it is critical to only remove the calc-collector cap after the appliance is switched off for more than two hours. This allows the pressure of the boiler to decrease to a safe level for releasing the limescale / calcification.
To remove limescale from your appliance, please follow the instructions below:
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on «I».
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in «Stand-by» mode ==> Press the «On-Off» button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on «I».
The product is in «Stand-by» mode ==> Press the «On-Off» button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Make sure that the 2 masts are correctly oriented first:
After rinsing the boiler, you need to press and hold the restart button for about 3 seconds to stop the light flashing.
You have pressed the steam trigger 3 times briefly and successively which triggered the «Boost» mode. The steam is then automatically activated for a few seconds.
• After approximately one minute, and regularly while it is being used, your IXEO Power’s electric pump injects water into the boiler. It makes a noise and this is quite normal. A slight drop in steam may also be noticed at the same time.
• Your appliance has limescale, consult the «Descaling» section in the instructions.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Tefal IXEO Power QT2020
www.tefal.com
IXEO POWER QT20XX
EN
FR
ZH
MS
AR
1820003310
View the manual for the Tefal IXEO Power QT2020 here, for free. This manual comes under the category steam cleaners and has been rated by 3 people with an average of a 9.1.
This manual is available in the following languages: English. Do you have a question about the Tefal IXEO Power QT2020 or do you need help?
Ask your question here
Product Images (14)
Tefal IXEO Power QT2020 specifications
Below you will find the product specifications and the manual specifications of the Tefal IXEO Power QT2020.
The Tefal IXEO Power QT2020 steam cleaner is a versatile and efficient cleaning tool. With a warm-up time of 70 seconds, this cleaner quickly reaches optimal temperature, allowing for immediate use. The 1.9-meter cable length offers flexibility and ample reach for cleaning various areas.
With an iron power of 2170 W, the Tefal IXEO Power QT2020 delivers strong heat for effective wrinkle removal. Its maximum steam pressure of 5.8 bar ensures thorough cleaning and sanitization. The 1.1-liter water tank capacity provides an ample supply of water, reducing the need for frequent refills.
Equipped with a 90 W boiler power, this steam cleaner effectively generates steam for efficient cleaning. The 360° rotational base allows for easy maneuverability, enabling access to hard-to-reach areas. With variable steam control, users can adjust the steam output according to their cleaning needs.
The 1.7-meter hose length provides flexibility and ease of use during cleaning tasks. The Tefal IXEO Power QT2020 steam cleaner delivers reliable and consistent performance, making it a durable and long-lasting cleaning appliance.
In summary, the Tefal IXEO Power QT2020 steam cleaner offers quick warm-up time, ample cable length, high iron power, strong steam pressure, generous water tank capacity, efficient boiler power, a 360° rotational base, variable steam control, and sufficient hose length. Its reliable and durable construction ensures effective cleaning in various settings.
General
| Brand | Tefal |
| Model | IXEO Power QT2020 | QT2020CH |
| Product | steam cleaner |
| EAN | 3121040075203 |
| Language | English |
| Filetype | User manual (PDF), Instructions / Assembly (PDF) |
Features
| Warm-up time | 70 s |
| Iron power | 2170 W |
| Maximum steam pressure | 5.8 bar |
| Water tank capacity | 1.1 L |
| Boiler power | 90 W |
| Soleplate type | — |
| Automatic anti-calc | — |
| Product color | Black, Copper colour |
| 360° rotational base | Yes |
| Variable steam | Yes |
Ergonomics
| Cable length | 1.9 m |
| Hose length | 1.7 m |
show more
Frequently Asked Questions
Can’t find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Tefal IXEO Power QT2020 below.
How do I assemble the Tefal IXEO Power QT2020 steam cleaner?
Start by attaching the handle to the main body of the cleaner, making sure it clicks into place securely. Then, connect the water tank to the main body. Finally, attach the desired cleaning head or accessory to the steam hose.
How do I fill the water tank with the right amount of water?
Remove the water tank from the main body by unlocking it and lifting it upwards. Fill the tank with tap water up to the maximum indicated level, which is usually marked on the tank itself or mentioned in the user manual. Do not exceed the maximum level to avoid any water spillage or damage to the device.
How do I adjust the steam output of the Tefal IXEO Power QT2020?
The steam output can be adjusted using the steam control dial located on the handle of the steam cleaner. Turn the dial to the desired steam level, ranging from low to high, according to your cleaning needs.
How do I clean different surfaces using the Tefal IXEO Power QT2020 steam cleaner?
The steam cleaner can be used on a variety of surfaces such as floors, carpets, and upholstery. To clean floors, attach the appropriate floor head and glide it over the surface while pressing the steam trigger. For carpets and upholstery, use the specified cleaning attachment or accessory, ensuring to follow the recommended techniques to avoid any potential damage.
How do I store the Tefal IXEO Power QT2020 steam cleaner properly?
To store the steam cleaner, detach the water tank and empty any remaining water. Ensure the device is completely cooled down before storing. Wrap the power cord around the cord hooks or storage slots provided on the appliance. Finally, find a safe and dry place to store the steam cleaner, preferably in an upright position, to avoid any accidental damage.
What is the warm-up time of the Tefal IXEO Power QT2020?
The warm-up time of the Tefal IXEO Power QT2020 is 70 seconds. This means that users can start steaming quickly after turning on the device.
What is the iron power of the Tefal IXEO Power QT2020?
The iron power of the Tefal IXEO Power QT2020 is 2170 Watts. This is a high level of power, which results in efficient and effective ironing.
What is the maximum steam pressure of the Tefal IXEO Power QT2020?
The Tefal IXEO Power QT2020 has a maximum steam pressure of 5.8 bar. This high steam pressure ensures deep and thorough cleaning, making it suitable for various surfaces.
What is the water tank capacity of the Tefal IXEO Power QT2020?
The Tefal IXEO Power QT2020 has a water tank capacity of 1.1 liters. This relatively large capacity means users can steam and clean for an extended period before needing to refill the tank.
Does the Tefal IXEO Power QT2020 have a 360° rotational base and variable steam function?
Yes, the Tefal IXEO Power QT2020 has a 360° rotational base and variable steam function. This allows users to maneuver the steam cleaner easily and adjust the steam output according to their needs, enhancing convenience and customization during cleaning tasks.
Is the manual of the Tefal IXEO Power QT2020 available in English?
Yes, the manual of the Tefal IXEO Power QT2020 is available in English .
Is your question not listed? Ask your question here
Выбирайте подходящий режим для бережного ухода за любым типом ткани.
Идеальная температура
подошвы утюга
Усовершенствованная система ухода за тканями создаёт безопасную температуру и силу пара для всех типов ткани, даже таких деликатных как шёлк, без дополнительных настроек и риска прожечь ткань.
Быстрый нагрев за 70 секунд
Ваша универсальная паровая гладильная система
3 в 1 готова к работе за считаные секунды, чтобы
вы могли привести одежду в порядок даже
тогда, когда времени совсем мало.
Легкость в управлении
Удобный утюг в два раза легче обычного.
Система защиты от накипи
Поддерживает высокую мощность пара и неизменную эффективность день за днем.
Аксессуары для удобства
Щетка для плотной ткани и съемный крючок
для удобного вертикального отпаривания.
Телескопические стойки
Регулировка высоты для удобства использования и хранения.
Передвижная основа
Для комфортного перемещения.
Легкая съемная база
Для удобного отпаривания штор, мебели и другого текстиля.
* Уничтожает бактерии видов Staphylococcus aureus, Escherichia coli и Klebsiella pneumoniae при контакте с поверхностью обрабатываемой вещи, согласно исследованию Eurofins Biolab S.r.l. N° 1065520A01