Стиральная машина daewoo dwd m8011 инструкция

INSTRUCTION MANUAL

DWD-M8011/DWD-M8012/DWD-M8013

Washing Machine Instruction Manual

CONTENTS Page

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.

󱇲 Economic washing system

The washing machine determines the water level and washing time

automatically by sensing the amount of laundry and water temperature
in order to minimize energy and water consumption.

󱇲 Low noise system

The washing machine minimizes the spinning noise level by sensing

the amount of unbalance of laundry.

󱇲 Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential parts inside, the

washer sterilizes up to 99.9% as is done by boiling wash.

󱇲 Air bubble washing(Option)

This is an advanced technology that generates millions of air bubbles inside the drum on washing

sequence, and the bubbles dissolve the detergent particles completely and cleanse all the soil in
clothes gently and neatly.

PARTS AND FEATURES…………………………………………………………………………………………………..2

WASHER SAFETY……………………………………………………………………………………………………………3

INSTALLATION INSTRUCTIONS……………………………………………………………………………………….4

ELECTRICAL REQUIREMENTS ………………………………………………………………………………………..6

OPERATING YOUR WASHER…………………………………………………………………………………………..6

THE FUNCTIONS OF THE CONTROL PANEL…………………………………………………………………….8

PROGRAMS AND FUNCTIONS…………………………………………………………………………………………9

WASHING PROCEDURE AND PROGRAM SELECTION…………………………………………………….10

MAINTENANCE ……………………………………………………………………………………………………………..11

HOW TO CLEAN THE FILTER…………………………………………………………………………………………12

REMOVING STAINS……………………………………………………………………………………………………….13

TROUBLE SHOOTING ……………………………………………………………………………………………………14

SPECIFICATION…………………………………………………………………………………………………………….15

2

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer .

Accessories

NOTE

The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book.
Your model may not include all features.

Inlet hose

(Cold: 1EA, Hot: 1EA)

Manual Sticker holder (3EA)

Guide Hose Drain

(Option)

ADJUSTABLE LEG

CONTROL PANEL

DOOR

DETERGENT CASE

INLET HOSE (HOT)

(OPTION)

INLET HOSE (COLD)

COVER PUMP

POWER CORD

HOSE DRAIN

3

Save these instructions

Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the
following basic precautions.

Understanding your responsibilities

• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same
wash. Hazardous fumes can form.

• Unplug power supply cord before attempting to service your washer .

• Do not wash fiberglass material.
Small particles can stick to fabrics washed in following loads and cause skin irritation.

• Do not spray water on the control panel of the washer .
It could cause fire or an electric shock.

• In case of the dual valve model, if you connect only one water inlet valve, the water leakage
from other water inlet valve(unconnected) can occurs.

• This appliance must be grounded.
To avoid electrical shock, use a metal pipe for the ground connection.

• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be used
or stored in or near your washer .
Do not add flammable fluids to your wash
water.These substances give off vapors that
can create a fire hazard or explosion.

• After starting a cycle, do not reach into the
washer until all motions stop.

• Do not tamper with the controls.

• The appliance is not intended for use by
young children or infirm persons without
supervision.

• If the supply cord is damaged, it must be
replaced by the manufacturer , or its service
agent or a similarly qualified person in order
to avoid a hazard.

• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so that it is not
subjected to splashing or ingress of
moisture.

Please …

• Have only a qualified person install, repair ,
or replace parts on washer .

• Maintain washer properly.

• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.

• Do not install the washer at a place of
extremely high humidity. It could cause an
electric shock or a short circuit.

• Connect washer to the correct outlet,
electrical supply, water supply , and drain
supply .

WASHER SAFETY

Read all instructions before using your washer

4

Removing transit bolts

1. Before operating the washer, remove the transit
bolts(3ea) along with the rubber.

• If the bolts are not removed, it may cause

heavy vibration, noise and malfunction.

2. Unscrew the 3 bolts with the 10mm hex wrench
or spanner or cross-tip screwdriver. Keep the 3
bolts for a later time.

• When the appliance is transported, transit bolts

will be re-used.

3. Close the holes with sticker holders supplied.

Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct

installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on the horizontal solid floor.

If the washer is installed on an unsuitable floor, it could make considerable noise,
vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or
down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the washer is

installed on a carpeted floor.

• Leave some space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance between top of the washer and bottom of

upper plate should be at least 3mm.

Inlet hose connection

• The washer should be connected to the water mains using new hose set and old hose sets should not be

reused.

• In case of only one water inlet valve, connect the inlet hose to the cold water tap.

• Periodically check the tightness of the inlet hose.

• Make sure that the inlet hose is not kinked or folded and that it is not crushed.

INSTALLATION INSTRUCTIONS

Laundry

Tub

Washer

approx.

2cm

Drain Hose

1. Connect the inlet hose
to the water tap tightly .

2. Connect the inlet
hose to the water
inlet valve
tightly .

5

Drain system

• Never forget to install drain hose before operating your washer .

• Open the packing box, and the drain hose is tied at backside of washer.

• If you use the laundry tub,

Top of laundry tub must be at least 60cm high and no higher than

100cm from bottom of washer.

• When installing the drain hose to tub(sink), secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer .
This will cause abnormal noise.

Level adjustment

1 If the washer is installed on an

unsuitable floor, it could make
considerable noise, vibrate and
cause a malfunction.

2 Adjust the level of washer using adjustable legs.

• Please check if there is any gap between the

four adjustable legs and the floor .

• Adjust the level of washer by turning

adjustable legs. And make it sure that there is
no swaying of washer .

• After the adjustment is finished, turn the fixing

nuts up tightly so that the washer maintains
the adjustment.

3 Make it sure that the washer does not sway when you press

down the four corners of the washer’s top plate.

adjustable leg

Fixing Nut

NOTE

There should be no swaying of washer and all the
adjustable legs should stick to the floor closely.

Инструкция стиральной машины Daewoo DWD-M8011

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке