ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
MANUAL INSTRUCTION
МОДЕЛЬ VT 1760
ULTRASONIC HUMIDIFIER
УЛЬТРОЗВУКОВОЙ УВЛАЖНИТЕЛЬ
Vt-1760.qxd 19.09.03 11:29 Page 2
ПРИМЕЧАНИЕ
В случае несоблюдения правил очистки частей прибора от минеральных
загрязнений, вызванных использованием недистиллированной воды
эффективность работы прибора может снизиться. В этом случае гарантийное
обслуживание не осуществляется.
Прибор не включится, если резервуар не установлен на базу правильно.
СПЕЦИФИКАЦИЯ
Питание
230 V ~ 50 Hz
Потребляемая мощность
34 W
СРОК СЛУЖБЫ УВЛАЖНИТЕЛЯ НЕ МЕНЕЕ 3 Х ЛЕТ
11
2
РУССКИЙ
ENGLISH
ULTRASONIC HUMIDIFIER
1.Water tank
2.Power switch
3.Power indicator
4.Nebulizer
5.Air outlet
6.Base
7.Mist nozzle
8.Water valve
9.Water sensor
10.Process chamber
Vt-1760.qxd 19.09.03 11:29 Page 4
Дайте раствору впитаться. После этого промойте камеру под струей воды и
протрите насухо. Не касайтесь распылителя пальцами, т.к. отпечатки пальцев
могут ухудшить качество производимого тумана. Будьте осторожны при уходе за
сенсором.
Ежемесячный уход
В случае, если Вы не собираетесь пользоваться прибором некоторое время,
убедитесь, что все его части сухие, включая рабочую камерную. Не храните
прибор с водой в рабочей камере.
НЕИСПРАВНОСТИ И ИХ УСТРАНЕНИЕ:
РУССКИЙ
10
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING HUMIDIFIER, ESPECIALLY THESE BASIC
SAFETY PRECAUTIONS:
1. Before using the humidifier, extend the cord and inspect for any signs of damage. Do
not use product if cord has been damaged.
2. Always place humidifier on a firm, flat; level surface. Keep cord away from heated
surfaces and out of the way, where it cannot be stepped on or tripped over.
3. Do not place the humidifier directly on wood furniture or other surfaces that could be
damaged by water. Protect by placing the humidifier on a non metallic waterproof
surface.
4. Do not place in direct sunlight, high temperature areas, or near computers or sensi
tive electronic equipment.
5. Do not operate outdoors, this appliance is intended for indoor use.
6. Do not operate without water. Turn off unit when water bottle is empty.
7. Do not use with a water bottle over 0.4 gallons (1.5 liters) or 12 inches in height.
8. Do not use glass bottles. Do not use carbonated water.
9. Do not add any. Do not cover, or insert objects into, any openings on the unit.
10. Do not immerse the base in water or other liquid. Do not overfill.
11. This product has a polarized plug (one blade is wider than the other) as a safety fea
ture. This plug will fit into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
12. CAUTION: To avoid the risk of fire, shock or personal injury, do not use an extension
cord.
13. Humidifier should always be unplugged and emptied when not in operation or while
being cleaned. Shut off and unplug humidifier before moving. Do not move or tilt
humidifier while it is operating. Plug and unplug unit with dry hands.
14. The humidifier should not be left unattended in a closed room since air could become
saturated and leave condensation on walls or furniture. Leave room door partly open.
Do not aim Mist Nozzle directly at children, walls or furniture.
15. CAUTION: Do not touch the nebulizer while the unit is plugged in as burns could
result.
USING YOUR PERSONAL HUMIDIFIER
First Time Use
Read all instructions before using this appliance.
Unpack and remove all packing material from the Base. Completely unravel power cord
and place unit on a flat, stable surface. Follow the directions below to fill and operate the
Humidifier.
Water Bottle
The Purely Personal Humidifier is designed to be used with commonly available bottled
3
ENGLISH
Переключатель
установлен в положение
«вкл», но индикатор
питания не горит
Туман не появляется из
сопла или появляется в
малом количестве
Вокруг прибора и на
окнах образуется
конденсат
Появление белой пыли
прибор не подсоединен
к сети; нет напряжения в
сети
резервуар для воды
пуст; прибор установлен
на наклонной плоскости
известковые отложения
на распылителе и
сенсоре
не включенвентилятор;
вода слишком холодная
вентилятор работает, но
туман не проходит через
сопло не работает
распылитель на
распылителе появилась
пена (после
неправильной чистки)
На приборе установлен
слишком интенсивный
для данного помещения
режим выработки тумана
Используется слишком
жесткая вода
подсоедините прибор к
сети; проверьте
напряжение в сети и
исправность розетки
заполните резервуар
водой установите
прибор на ровной
поверхности очистите
распылитель и сенсор в
соответствии с
указаниями инструкции
убедитесь, что вода в
рабочей камере касается
сенсора используйте
воду комнатной
температуры рабочая
камера переполнена
водой. вылейте излишек
воды из рабочей
камеры см. гарантиюсм.
рекомендации по чистке
и уходу
Переключите прибор на
менее интенсивный
режим работы или
отключите его
Используйте
дистиллированную воду
Vt-1760.qxd 19.09.03 11:29 Page 6
Инструкция по эксплуатации:
1.Не используйте увлажнитель, если в резервуаре нет воды
2.После заполнения резервуара убедитесь, что переключатель вкл/выкл
находится в положении «выкл»
3.Переведите переключатель вкл/выкл в положение «вкл».
После этого загорится
индикатор питания
4.Туман появится через некоторое время.
Подождите несколько минут, пока
рабочая камера не заполнится водой
5.Не направляйте сопло прибора на мебель или стены.
Если на мебели или
стенах появляется конденсат, или если относительная влажность в комнате
превышает 50%, переведите регулятор на одно деление влево, откройте дверь
в комнату, где работает увлажнитель или полностью отключите прибор
6.Если туман не появляется из сопла, отключите прибор и проверьте, покрывает
ли вода сенсор в рабочей камере. После этого убедитесь, что резервуар для
воды плотно установлен на место
7.Всегда отключайте прибор перед снятием резервуара для воды или перед
заполнением его водой. После того, как резервуар для воды опустеет,
производство тумана прекратится, но вентилятор продолжит работать. Перед
заполнением резервуара для воды убедитесь, что рабочая камера пуста.
УХОД И ЧИСТКА
Предупреждение: Всегда отсоединяйте прибор от сети перед чисткой.
Ежедневный уход:
1.Снимите резервуар для воды и вылейте воду из рабочей камеры.
Протрите
части прибора мягкой влажной тканью.
2.Не погружайте основание прибора в воду.
Осторожно протрите мягкой сухой
тканью рабочую камеру. Следите, чтобы вода не попадала в выпускное
воздушное отверстие.. Не пытайтесь удалить или усовершенствовать сенсор
наличия воды в рабочей камере.
3. Не обрабатывайте чистящими средствами емкости для воды, т.к. это может
ухудшить качество тумана. Не используйте для чистки абразивные средства и
щетки.
4.Не оставляйте воду в рабочей камере увлажнителя, так как известковый осадок
может ухудшить работу прибора
Еженедельный уход
1.Раз в неделю тщательно промывайте все части прибора раствором
отбеливателя (половина чайной ложки отбеливателя на 1,5л воды). После
этого тщательно сполосните части прибора водой.
2.Если вокруг распылителя и сенсора появились следы известкового осадка,
протрите эти области тканью, смоченной в не разведенном белом уксусе. Для
удаления сильных известковых отложений наполните рабочую камеру
раствором уксуса (50% белого уксуса и 50% воды). Не погружайте базу в воду!
9
water. Any standard bottled water that has either US, Australian or English threads may be
used. The amount of time that the humidifier will run will depend on the capacity of the
water bottle. For safety reasons, the size of the water bottle should be less than 0.4 gal
lons (1.5 liters) and 12 inches in height. Do not use glass bottles. Do not use carbonated
water.
Adapters
The Detachable Bottle Gap is sized to accept Australian threaded water bottles without an
adapter. Two adapters are provided to fit U.S. and English bottle styles. The adapter with
the yellow 0 ring fits US threaded bottled water. The adapter with the red 0 ring fits
English threaded bottled water. For storage, an adapter compartment is located on the
underside of the base.
Connecting the Water Bottle
Always UNPLUG the humidifier before filling.
1.Remove the Detachable Bottle Cap from the top cover. Determine whether an English
Threaded Adapter or a US Threaded Adapter should be used with the Detachable Bottle
Gap. Secure the adapter if needed into the Detachable Bottle Gap by turning clockwise.
2 Secure the Detachable Bottle Cap to the neck or the full Water Bottle by turning clock
wise Ideally, water should be at room temperature. Use of very cold water may temporar
ily reduce the mist output. Never fill the humidifier with hot or warm water as this could
cause damage and void your warranty.
3.Remove the Top Cover from the Base and inspect the Reservoir and Nebulizer for
cleanliness. Refer to Care and Gleaning section below
4.Replacethe Top Cover onto the Base. Turn the Water Bottle/Detachable Bottle Cap
Assembly over and check to be sure that no water is leaking. Place the Water Bottle/
Detachable Bottle Cap Assembly info the opening in the Top Cover from which the
Detachable Bottle Cap was removed.
OPERATING INSTRUCTIONS
1. Do not operate the humidifier without water in the Water Bottle.
2. After filling the humidifier, be sure the Switch is in the OFF position. A voltage selector
switch is provided on some models. Select the appropriate Volt AG using the switch on the
back of the humidifier and then plug the power cord into wall outlet. The 115 Volt AC set
ting can be used for 110 120 Volt AC and 230 setting for 220 240 Volt AC.
3. Turn the Switch to the On position. The Power Indicator will illuminate. Some models
have one output setting and some models have two output settings.
4. Mist will not appear immediately; allow a few minutes for the water to fill the reservoir.
5. Direct Mist Nozzle away from walls and furniture. If condensation forms on walls or win
dows, or if indoor relative humidity exceeds 50% turn the Switch to the low setting, open
door to room where humidifier is operating, or turn unit off.
6. lf mist is not produced, unplug cord and check the Water Sensors in the Reservoir to
ensure they are covered by the water. The water level in the Reservoir must be high
enough to partially immerse the Water Sensors in order for the humidifier to work. In addi
ENGLISH
4
РУССКИЙ
Vt-1760.qxd 19.09.03 11:29 Page 8
ПОЧИТАЙТЕ И СОХРАНИТЕ ДАННУЮ ИНСТРУКЦИЮ
Быстрое увлажнение сухого воздуха в помещении
Ультразвуковая бесшумная технология получения тумана
Допускается заполнение резервуара любой очищенной водой
ПРАВИЛА БЕЗОПАСНОГО ИСПОЛЬЗОВАНИЯ
1.Перед использованием прибора внимательно осмотрите сетевой шнур и
убедитесь, что он не поврежден. Не используйте прибор при поврежденном
сетевом шнуре.
2.Располагайте прибор на твердой, устойчивой поверхности.
Не располагайте
шнур вблизи горячих поверхностей.
3.Не направляйте сопло увлажнителя на деревянную мебель и на предметы,
которые могут быть повреждены влагой. Не направляйте сопло увлажнителя на
детей. Рекомендуется устанавливать прибор на влагоустойчивой
неметаллической поверхности
4.Не располагайте увлажнитель в местах, подверженных воздействию прямых
солнечных лучей, высоких температур, вблизи компьютеров или
чувствительной электронной техники
5.Прибор рассчитан на применение только внутри помещений
6.Не включайте прибор без воды.
Отключите прибор после опустения
резервуара для воды
7.Не используйте газированную воду
8.Не добавляйте какие либо медицинские препараты в сопло прибора, в
резервуар с водой. Не накрывайте вентиляционные отверстия и не допускайте
попадания в них посторонних предметов
9.Не погружайте основание в воду и не наполняйте резервуар выше
рекомендованных норм
10.Внимание! Во избежания пожара и электрошока не используйте удлинители
11.Всегда отключайте прибор от сети и выливайте воду из резервуара во время
чистки или если Вы не пользуетесь увлажнителем. Отключите прибор от сети
перед тем, как перемещать его в другое место. Не двигайте и не наклоняйте
прибор во время работы. Прикасайтесь к штепсельной вилке только сухими
руками.
12. Не оставляйте прибор без присмотра в закрытом помещении, т.к. на мебели и
стенах может появиться конденсат. Поэтому дверь в помещение, где работает
увлажнитель, рекомендуется держать приоткрытой.
13.Во избежания пожара не касайтесь распылителя во время работы прибора.
ИСПОЛЬЗОВАНИЕ УВЛАЖНИТЕЛЯ
Использование в первый раз
Перед использованием прочитайте инструкцию
Распакуйте прибор. Полностью размотайте сетевой шнур и установите прибор на
плоской ровной поверхности. Следуйте приведенным ниже указаниям по
заполнению прибора водой и его эксплуатации
РУССКИЙ
8
tion, make sure the Top Cover is securely in place.
7. Turn the humidifier off before removing the Water Bottle to refill or replace it. When the
Water Bottle is empty the mist will stop although the fan will continue to operate. Do not
replace the Water Bottle/Detachable Bottle Cap Assembly onto the top cover if the
Reservoir is full. This could lead to overfilling of the reservoir. Empty the Reservoir of water
prior to replacing the Water Bottle/Detachable Bottle Cap Assembly onto the top cover.
CARE AND CLEANING
Daily Maintenance:
1 Lift the Water Bottle/Detachable Bottle Cap from the Top Cover Remove the Detachable
Bottle Cap and any adapters from the Water Bottle Remove the Top Cover and empty all
water from the Reservoir Wipe the Top Cover, Detachable Bottle Cap and Adapters clean
with a soft, damp clothe.
2 Do not immerse the Base in water Gently wipe the reservoir with a soft clean, wet clothe.
Keep water away from the Air Outlet in the Base. Do not attempt to remove or in any other
way modify the Water Sensor Use care when wiping around the Water Sensor For storage,
wipe dry with a soft, clean cloth.
3 Do not use detergent to clean any water containing parts of the humidifier Detergents
and the film they leave behind can affect the output of the humidifier. Do not use abrasive
cleansers or brushes
4 Do not leave water in the Reservoir when unit is not in use as it may result in the build up
of mineral deposits and bacteria that can inhibit the output efficiency of the humidifier
Weekly Maintenance:
1 Thoroughly clean humidifier every week using a solution of bleach and water (1/2tea
spoonof bleach in 1/2 gallon of water) Wipe the Reservoir, Top Cover, Detachable Bottle
Cap and Adapters with a soft cloth dampened in the solution Rinse area thoroughly before
proceeding.
2 lf mineral deposits are evident around the Nebulizer and Water Sensors, clean their sur
faces with a soft, clean cloth and a small amount of undiluted white vinegar If necessary
for removal of mineral deposits, mix a solution of 53% white vinegar and 50% water and
fill the base with enough solution to cover the Nebulizer Do not immerse the Base in water
Allow it to soak for an hour Then use a cotton swab to gently loosen build up on the
Nebulizer Rinse out the Reservoir and wipe clean Do not touch Nebulizer with bare fingers
as any fingerprints or other residue can affect mist output Be careful not to damage the
Water Sensors.
3 All surfaces should be thoroughly cleaned with water prior to reuse
End of Season Maintenance
1 Follow above weekly cleaning procedure at the end of the humidification season, or
when the humidifier will not be used for several days, bang sure to dry all parts including
the Reservoir. Do not store with water inside.
ENGLISH
5
Vt-1760.qxd 19.09.03 11:29 Page 10
7
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Solution
Power Switch is
Unit not plugged in
Plug unit in
set to «On» and
No power at outlet
Check circuits, fuses, test
Power Indicator is off
outlet.
Little or no mist
Water Bottle Empty
Use room temperature water.
is produced
Blower operating but mist
Reservoir overfilled. Empty
not exiling through outlet
Reservoir and reset
nozzle.Water Bottle.
Nebulizer not functioning
See Warranty
Soap residue on Nebulizer
Follow Care and
(cleaned incorrectly)
Cleaning instructions.
Condensation forms
Mist Intensity is set too high Decrease mist output to low or
around humidifier
for room size or preexisting off using the Switch.
or windows
humidity level.
White Dust
Hard water used
Use distilled water.
Accumulation
SPECIFICATION
Power requirement
230 V ~ 50 Hz
Power consumption
34 W
SERVICE LIFE OF THE HUMIDIFIERNOT LESS THAN 3 YEARS
ENGLISH
6
УЛЬТРОЗВУКОВОЙ
УВЛАЖНИТЕЛЬ
РУССКИЙ
1.Резервуар
2.Переключатель вкл.
/выкл.
3.Индикатор питания
4.Распылитель
5.Воздуховыпускное
отверстие
6.Основание
7.Сопло
8.Водяной клапан
9.Сенсор наличия воды
в рабочей камере
10.Рабочая камера
Vt-1760.qxd 19.09.03 11:29 Page 12
04:32
Увлажнитель воздуха VITEK VT-1764
08:42
Увлажнитель воздуха Vitek VT-1762 SR ( neckoby )
19:59
Ремонт увлажнителя воздуха VITEK VT-1765W
13:55
Импульсный блок питания или плата питания для увлажнителя воздуха Vitek VT-1765W с Aliexpress
03:00
Увлажнитель воздуха VITEK VT 1761
10:56
Увлажнитель воздуха Vitek ремонт.
Нажмите на кнопку для помощи
…
Vitek User Manual [ru]
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
MANUAL INSTRUCTION
МОДЕЛЬ VT1760
ULTRASONIC HUMIDIFIER
УЛЬТРОЗВУКОВОЙ УВЛАЖНИТЕЛЬ
Vt-1760.qxd 19.09.03 11:29 Page 2
ПРИМЕЧАНИЕ
В случае несоблюдения правил очистки частей прибора от минеральных
загрязнений, вызванных использованием недистиллированной воды
эффективность работы прибора может снизиться. В этом случае гарантийное
обслуживание не осуществляется.
Прибор не включится, если резервуар не установлен на базу правильно.
СПЕЦИФИКАЦИЯ
Питание 230 V ~ 50 Hz
Потребляемая мощность 34 W
СРОК СЛУЖБЫ УВЛАЖНИТЕЛЯ НЕ МЕНЕЕ 3Х ЛЕТ
112
РУССКИЙENGLISH
ULTRASONIC HUMIDIFIER
1. Water tank
2. Power switch
3. Power indicator
4. Nebulizer
5. Air outlet
6. Base
7. Mist nozzle
8. Water valve
9. Water sensor
10.Process chamber
Vt-1760.qxd 19.09.03 11:29 Page 4
Loading…
| Тип увлажнителя | ультразвуковой |
| Назначение прибора | увлажнение |
| Расход воды | 250 мл/ч |
| Управление | механическое |
| Регулировка скорости вентилятора/интенсивности испарения | есть |
| Регулировка направления увлажнения | есть |
| Обслуживаемая площадь | 25 м2 |
| Индикатор низкого уровня воды | есть |
| Деминерализующий картридж | есть |
| Подсветка корпуса | есть |
| Индикатор включения | есть |
| Потребляемая мощность | 30 вт |
| Источник питания | сеть |
| Дополнительно | Запасной фильтр VT-1779 |
| Емкость резервуара для воды | 3 л |
показать все характеристики
Жители городских квартир зачастую страдают от сухого воздуха в комнатах. Но с данной проблемой вы легко справитесь, если приобретете изящный увлажнитель воздуха VT-1760 W. Несмотря на небольшую потребляемую мощность, данный увлажнитель идеален для помещений до 25 кв. м.! Вы будете наслаждаться его высокой производительностью и безопасной работой. Устройство автоматически отключается, если в резервуаре не будет воды, при этом оно всегда вас оповестит, что необходимо добавить воду, и это максимально удобно при использовании. Благодаря простому механическому управлению вы без труда зададите мощность подачи холодного пара в зависимости от микроклимата в вашем доме.
Airo2
Nano Silver Filter
Nano Silver filter – керамические гранулы, насыщенные ионами серебра, очищают воду от вредоносных микробов и смягчают ее, продлевая срок службы прибора.
Vitek VT-1760 Humidifier PDF User Guides and Manuals for Free Download: Found (3) Manuals for Vitek VT-1760 Device Model (Manual Instruction)
When it comes to kitchen appliances, versatility and efficiency are key. The Vitek VT-1760 has captured attention in the realms of home cooking and food preparation. This remarkable device combines several features that make it an ideal choice for anyone looking to elevate their culinary experience. In this review, we will explore the design, features, performance, and overall usability of the Vitek VT-1760.
One of the first things that stands out about the Vitek VT-1760 is its sleek and modern design. The exterior is crafted from high-quality materials, giving it a premium feel that fits well with any contemporary kitchen decor. The compact size of the VT-1760 ensures that it does not take up excessive counter space, making it perfect for both small apartments and larger homes alike.
Now, let’s delve into the main features that distinguish the Vitek VT-1760 from competitors:
- Multi-Functionality: The VT-1760 is not just a basic kitchen appliance. It serves multiple functions including steaming, boiling, and frying. This makes it suitable for a variety of cooking methods.
- User-Friendly Controls: The intuitive interface makes it easy for users of all skill levels to navigate its functions. The clear display and buttons allow for effortless operation.
- High Efficiency: Equipped with advanced heating technology, the device cooks food evenly and quickly, saving both time and energy.
- Easy to Clean: The non-stick surface ensures that food does not stick, making cleanup a breeze. Most removable parts are also dishwasher safe.
Performance-wise, the Vitek VT-1760 excels in delivering consistent results. Users have noted that the appliance heats up rapidly, which significantly reduces cooking time. Whether you are preparing a quick breakfast or a leisurely dinner, the VT-1760 proves to be reliable. Additionally, the quality of the cooked food has received high praise; dishes come out with balanced flavors and the perfect texture.
Another aspect worth mentioning is the safety features integrated into the Vitek VT-1760. It includes an automatic shut-off function and overheating protection, ensuring peace of mind while cooking. These features are especially beneficial for busy individuals who may not always be able to give their full attention to the appliance.
However, no product is without its drawbacks. While the Vitek VT-1760 shines in many areas, some users have reported a learning curve in mastering its multiple functions. Initially, it may be overwhelming for someone transitioning from more simplistic appliances. Therefore, it’s recommended to read the manual thoroughly and perhaps watch a few tutorial videos to get the best usage out of it.
In conclusion, the Vitek VT-1760 comes highly recommended for those who value flexibility and efficiency in the kitchen. Its modern design, advanced features, and excellent performance make it a worthy investment for any home cook. Despite a small learning curve, the benefits far outweigh the drawbacks, and the VT-1760 stands as a testament to Vitek’s commitment to innovative kitchen solutions. For anyone looking to elevate their cooking game, the Vitek VT-1760 is certainly worth considering.
